Enhance nighttime visibility and safety on outdoor walkways, stairs, and lawns with this flush-mounted illumination fixture. Designed for discreet integration, the slim chassis sits level with deck boards and step edges to cast unobtrusive guidance after sunset. A robust polycarbonate and ABS enclosure shields the internal electronics from rain and debris, while the clear faceplate ensures even light distribution across your property.
Functioning entirely off-grid, the unit relies on an attached photovoltaic panel and internal storage cell to operate independently each evening. After five to six hours of direct daylight, the system yields six to nine hours of usable light per cycle, with an expected full discharge window of seven to ten hours under normal load. Operators can select between a warm 3000K shade or a crisp 6000K tone via a conventional external toggle switch, while two integrated LEDs generate 96 lumens at a consumption rate of 0.6 watts per lamp. An IP65 sealing grade guarantees reliable performance during wet seasons and dusty conditions.
Technical Specifications
| Component | Details |
|---|---|
| Fixture Category | Recessed Deck & Step Light |
| Attachment Type | Wall Mount or Recessed Installation |
| Illumination Technology | Integrated LED (Two Lamps) |
| Color Temperature Selection | Warm White (3000K) or Cool White (6000K) |
| Energy Draw | 0.6W × 2 Lamps |
| Total Brightness | 96 Lumens |
| Solar Collector Rating | 3.7V / 1200mAh |
| Internal Battery Capacity | 800mAh |
| Expected Discharge Duration | 7–10 Hours |
| Practical Run Time | 6–9 Hours |
| Sunlight Charging Period | 5–6 Hours |
| Activation Interface | Standard Wall Switch |
| Environmental Sealing | IP65 |
| Housing Composition | PC + ABS Plastic |
| Exterior Coating | Gray Plastic |
| Cover Material | Transparent Surface |
| Deployment Environment | Outdoor Use |
Deploy this assembly in private gardens, courtyards, patio floors, residential staircases, and perimeter pathways. To ensure consistent operation and prevent mechanical damage, disconnect any active circuitry prior to servicing, and remove surface grime by wiping the glass cover gently with a soft, dry textile to maintain maximum light transmission.